NVR Software - SeeTec Surveillance
163
Note
The maximum AVI file size is limited to 4 GB.
Do not export any uncompressed images as video files. An export of
uncompressed images with 10 seconds length requires about
350 MB storage space.
If possible, do not use any Codecs installed by default by Windows
®
.
These codecs lead to low-quality export results.
If different frame rates and resolutions are present in the time
range to be exported (e.g. after a change from standard to alarm
recording) you should check the film sequence because the selected
codec may show a contorted image from the time of change
onwards.
SeeTec recommends the Xvid codec.
Exporting images (single camera)
This export type exports images in the MultimediaDatabase format of SeeTec and
stores the image data with encryption. The SeeTec OfflineViewer is required to
analyze the exported images. It is stored in the export directory during export. A
CD/DVD burning program (Totally Free Burner) is also exported.
Export image data to the client (single camera)
1. Right-click on a camera image.
2. Select
Export
>
Export image data to the client
.
3. Drag the time bar to the desired position.
4. Click on
Start
.
5. Drag the time bar to the desired stop position.
6. Click on
Stop
.
7. Enter a
Location
for export.
Important
For this export, ensure that the export path is available on the
SeeTec client.
For an export to a directory on the SeeTec server, see chapter
Export image data to the server (single camera)
(page 164).
