NVR Software - SeeTec Surveillance
104
Windows
®
Active Directory
®
support
Using Windows
®
Active Directory
®
1. Create a new group in Active Directory
®
.
2. Add domain users of the group in Active Directory
®
who should login via
SeeTec Active Directory
®
.
3. Create a group in SeeTec software analog to the group in Active Directory
®
and take capitalization into account while doing this.
4. Allocate the desired authorizations to the SeeTec group in SeeTec software
and activate the option
Enable Active Directory support Activate
Directory
.
When starting the software, users can now log on to SeeTec 5 directly with the
Active Directory-Login
button without having to fill in the
User name
and
Password
fields.
5. To automate Active Directory
®
login, specify the command line parameter
AutoADLogin
in the link to SeeTec Surveillance, see chapter
Command line
parameters
(page 175).
Note
You need not create any user within SeeTec software to login via
Active Directory
®
. The rights are allocated with the data stored in
the SeeTec groups.
To do this, create a group in Active Directory
®
and add the
corresponding users. You only need to create the group in the
SeeTec 5 system.
Password
Using secure passwords / changing passwords
A
secure
password is at least eight characters long, contains at least one upper,
one lower case character and one number. Special characters are also allowed.
1. To force a user to use a secure password, enable the
User must use a
secure password
option.
2. Activate
User may change password
to allow the user to change his or her
own password.
