NVR Software - SeeTec Surveillance
161
Write protection of recorded image data
You can write-protect recorded image data to ensure that potentially important
data is not overwritten automatically.
You can protect a maximum of 75 % of the loop recording volume.
Enabling write protection
1. Right-click on a camera image.
2. Select the option
Enable archive write protection
.
3. Drag the time bar to the desired position.
4. Click on the
Start
button, then on
Stop
to select a time range.
The time range to be protected is shown in yellow in the time bar.
5. Confirm your selection with the
OK
button.
Removing write protection / Status request
1. Click on
Write protection of recordings
in the
Extras
menu.
A list of all cameras embedded in the system is displayed.
2. Select the cameras for which you want to start a status request.
Selecting multiple items is possible.
3. Click on
Query
.
In the
The following write-protected recordings are available
field, all
protected areas of the cameras selected before are displayed.
4. Select the areas for which you want to remove the write protection.
Selecting multiple items is possible.
5. Click on
Remove write protection
.
The image data without write protection will be overwritten according to loop
recording.
