NVR Software - SeeTec Surveillance
116
E-mail and FTP
Note
If you want to send an e-mail, you must specify a
SMTP server
in
the
System Management
and an alarm e-mail address.
1. Enter subject and text in the
Subject
and
Message
fields of the e-mail to
send an e-mail as soon as an alarm occurs.
E-mails at the start of an alarm and e-mails at the end of an alarm are
differentiated.
At the start of an alarm, an e-mail without attachment is sent.
2. In the
Notify the following recipients when the alarm starts
field,
select the corresponding e-mail addresses.
Selecting multiple items is possible.
3. To send another e-mail when the alarm ends, use the
Notify the following
recipients when the alarm ends
field to select the corresponding e-mail
addresses.
Selecting multiple items is possible.
You can also send a video or single image sequence of the alarm recording along
with the e-mail when the alarm ends.
4. To do this, select the desired cameras in the field
Attach data from the
following cameras to the e-mails when the alarm ends
.
Selecting multiple cameras is possible.
5. In the
Data format
dropdown list, specify the data format of the export
(video or single image sequence).
6. Configure the data format (resolution, frame rate, length, etc.) in the
Camera configuration
and the
SeeTec Administration
fields.
Note
E-mail is resent after once in minute in case of problems during e-
mail-dispatch when alarm ends, e.g. if SMTP server cannot be
connected. After one hour, the resending stops and e-mail is
discarded.
