Superlift RDO1 C, Инструкция по эксплуатации

Страница: 9 / 15

- 9 -
RDO1 C
INSTALLATION INSTRUCTIONS
Slide the center of the Drive Unit over the door axle. Push the Drive Unit fully into the Door and ensure that
the Drive Forks engage into one of the door drum wheel spokes. Fig 11
Refit the door mounting bracket to the wall. The U-Bolt slots in the door bracket must align with the U-bolt
mounting slots in the Drive Unit. Fig 12 Note: In some cases the door mounting bracket may need to be re
positioned in order that the U-Bolt holes align.
Fig 12
Fully insert the specially supplied U-bolt through the Drive Unit and Wall Bracket slots.
Affix and firmly tighten the U-Bolt securing nuts.
Check the manual operation of the door by fully raising and lowering the door. The door should run
smoothly and should not catch on any part of the drive assembly.
2. FIXING OF DOOR CURTAIN TO DRUM WHEEL
2.1 The door curtain must be secured to the drum wheel with suitable fasteners.
2.2 With the door in the fully closed position, mark the curtain at points (A) and (B) Fig 13
Fig 13