Superlift RDO1 C, Инструкция по эксплуатации

Страница: 8 / 15

- 8 -
RDO1 C
INSTALLATION INSTRUCTIONS
1. FITTING DRIVE UNIT ASSEMBLY
(Right Hand Installation Depicted)
Check that the door U-bolt is securely tightened on the opposite end of the door to where you want to fit the
Drive Unit.
Open the door fully.
Place a suitable prop under the door as close to the edge (to which the drive unit is being fitted) as possible.
Fig 8 The prop should be adjusted so that it sits firmly under the door. Important Note: The door
curtain can become damaged quite easily once the full weight of the door is imparted on the prop.
The prop must be strong enough to sustain the full weight of the door but at the same time have
enough padding that it will not damage the door curtain
Fig 8 Fig 9
Remove the U-bolt from the end of the door to which the Drive Unit will be fitted.
Having ensured that the prop is stable and firmly in position, remove the Door Mounting Bracket from the
wall.
Fig 9
Remove the Drive Unit from the packaging. Rotate the forked drive gear by pushing the fork. If the drive
gear does not rotate, turn the Lock/Release leaver. Fig 2 (For more instructions on how to “Lock” and
“Release” the Drive Gear refer to Section 11)
Fig10 Fig 11