Superior xp-950, Инструкция

Страница: 62 / 172

62
Lights and reflector glass:
Reflectors and reflector glass should be installed on the front fork, on the back sides of the pedals and on the wheel spokes.
They should be replaced immediately in case of damage.
Riding in dark conditions, during the night and during periods of reduced visibility without suitable lights and
reflectors is hazardous and may lead to serious injury or death.
Frame:
Carry out repeated checks for damage of the paint around the tube connections. Bending or breakage of the frame can be
indicated in this way.
Replace any bent or broken frames immediately as excessive stress on the other parts of the frame occurs, which
creates a considerable risk of injury.
Quill assembly:
Pay attention to proper tightening of the locking nut; the fork should rotate smoothly. Retighten the nuts and bolts regularly as
required. Check regularly whether any components have not been damaged and pay attention to the correct installation of all
components at quill unit re-assembly.
Unsuitable modification of the quill assembly may affect riding ability and result in loss of control and falling. Take
your bike to your dealer and have your quill assembly modified by a professional.
The bike and its components have a service life and the materials used are subjected to fatigue with time.
If the service life of a component comes to its end, the component may fail suddenly and cause serious injury
to or even the death of the cyclist. In case of any symptoms indicating that the service life of a component is
coming to an end, it is necessary to replace this component immediately. An accident may terminate the service
life of individual components of the bike prematurely. Such components may fail suddenly, which may result in loss
of control and endanger your life or health or cause damage to your bike or to third parties.
INSTALLATION INSTRUCTIONS
Tightening torques for bike components
All tightening torques are expressed in Newton metres [Nm] .
In case of any uncertainty, please contact your dealer.
Component Torque [Nm]
- Spokes, hub, cassette -
Cassette 30-45
Tightening of the nuts on hub axle to frame (not applicable to quick-clamping types) 29-40
Idle gear 34-45
- Quill assembly, handlebar, saddle, seatpost -
Stem bolt for threaded quill assembly 19-30
Stem fixation bolt (for “ahead” threadless quill assembly) 6-9
Stem – handlebar tightening with four bolts 9-12
MTB – handlebar ends 6-12
Saddle tightening in seatpost 2 bolts, 17-19
1 bolt, 24-30
ENGLISH