EN
EN
80
81
5. Starter Battery (BATT2) Charging indication
NOTE: The AES signal port and RS485 port share the power of 5VDC/Max.200mA.
The MT11 power consumption is 13mA when it is ON, and 4mA when it’s off.
• The AES signal turns on after the BATT1 voltage reaches the boost charging voltage
or equalize charging voltage for 5 mins.
• The controller will check if the BATT1 is in a state of charging (the boost, equalize
or float stage) every 5 mins (This value is the judgement delay time for turning off
the AES signal which can be set via PC software, default as 5 mins, ranging form
0 to 999 mins), the AES signal control will be turned off if it meets the conditions
for 5 times.
Accessories
Tilbehør som er inkludert:
Local Temperature Sensor
1. Remote Meter (Model: MT11)
MT11 can display various operating data and fault information of the
system. The information can be displayed on a backlit LCD screen,
the buttons are easy-to-operate, and the numeric display is readable.
Standard version is for surface mounting, and optional version is for
wall mounting. (Standard version includes the communication cable).
Accessories (optional):
2. Remote temperature sensor (Model:RTS300R47K3.81A)
Acquisition of battery temperature for undertaking temperature com-
pensation of control parameters, the standard length of the cable is
3m (Length can be customized).The RTS300R47K3.81A connects to the
port (❹) on the controller.
3. WIFI Serial Adapter (Model:eBox-WIFI-01)
After the controller is connected with the eBox-WIFI-01 through the
optional communication cable of 1.5m(model:CC-RJ45-3.81-150U),
the operating status and related parameters of the controller can be
monitored by the mobile APP through WIFI signals.
4. RS485 to bluetooth adapter (Model:eBox-BLE-01)
After the controller is connected with the eBox-BLE-01 through the
optional communication cable of 1.5m(model:CC-RJ45-3.81-150U),
the operating status and related parameters of the controller can be
monitored by the mobile APP through Bluetooth signals.
5. AES adapter (Model: AES-ADP)
The adapter convers 5V of controller into 12V of the refrigerator,
it will supply the surplus solar power to the refrigerator to avoid
energy waste.
AES signal terminal
