SWTL4510 Operation Manual
50
5.14 ASSEMBLE THE BUCKET
To engage the bucket or other equipments follow the
steps below:
1)
Rotate the levers to unlock the
coupling pins completely.
2)
Move the machine to align the quick
coupler with the bucket.
3)
Move the machine slowly and
approach the quick coupler to the
bucket till the surface A touches the
surface B (see picture on the right).
4)
Raise the boom and fold the quick
coupler to position the quick coupler
combine well with the bucket. Then
fold the bucket completely.
5)
Stop the engine. Release the residual
pressure. Raise the restrain bar.
6)
Get off the machine.
7)
Rotate back the levers to the position of locking.
8)
Check the coupling pins are properly positioned in its retainers.
5.15 DISASSEMBLE THE BUCKET
To disassemble the bucket or other equipments follow the steps below:
1)
Move the machine to a level and firm surface.
2)
Lower the bucket to the ground and
incline forward bucket so that the
bottom side rest on the ground stably.
3)
Stop the engine. Release the residual
pressure. Raise the restrain bar.
4)
Get off the machine.
5)
Rotate the levers to unlock the
coupling pins completely.
6)
Get on the machine, start the engine
and release the parking brake.
7)
Move reversely slowly, at the same
time, lower a little the boom and
rotate forward the quick coupler. The
quick coupler topside will leave the
upper seat on the bucket.
5.16 AJUST THE QUICK COUPLER MECHANISM
