SWTL4518 Operation & Maintenance Manual
10
6)
Stop the engine.
(4) Prevent Fire from Fuel and Oil
•
Fuel and oil are easily to cause fire if they meet flame.
•
Keep always flame away from the fuel and oil.
•
Stop the engine and never smoke during refueling.
•
Only do the refilling fuel and oil in the well ventilated areas.
•
Close well the safety cap after refilling oil or fuel.
•
Do not fill the tanks in order to leave room for the fuel expansion.
•
If some fuel or oil is spilled wipe it up immediately.
(5)Prevent from Burns
•
After operating for a period, the engine, coolant,
hydraulic oil, engine oil, radiator and pumps are
hot. Do not touch them until they cool down.
•
In case of entailing working with hot oil, hot
coolant or hot hydraulic oil, wear gloves, heavy
clothing and safety goggles before do any check
or maintenance.
•
Loosen the coolant safety cap slowly when the coolant is hot to release the residual
pressure inside the tank before open it. If it is hot it may spurt out and cause serious
burns.
•
Before checking the coolant level, the hydraulic oil level and the engine oil level, stop
the engine and wait till they cool down.
(6)Prevent Damage Lead from Work Device
•
Do not stand in the area that the working equipment can reach when the machine is
operating. It may cause serious injury or even death.
•
Before perform working equipments, the operator must make sure that nobody is in the
dangerous area that working equipment can reach.
•
Try to lower the working equipment to the ground every time when you park the
machine.
•
During maintenance, make sure the equipment is locked correctly before go into the area
under lifted working equipment.
