SWTL4510 Operation Manual
43
•
After the coolant temperature reaches 60
°
C, lower the restrain bar and slowly operate all
working equipment cylinders for a while.
•
During warming up process, check if there is any abnormal noises or vibration s. If there
is, settle the problem before working.
5.5
STOPPING THE ENGINE
•
If the engine is stopped abruptly, the service life may be reduced considerably. Do
not stop the engine abruptly except in an emergency.
Stop the engine as follows:
1)
Run the engine at low idling for approximate 5 minutes so that the engine
cools down gradually.
2)
Turn the ignition key to OFF position to stop the engine.
3)
Remove the ignition key from the switch.
5.6
MACHINE MOVEMENT
•
Before you begin to move the
machine make sure you understand
all the control functions and also
all the safety regulation. A wrong
use of the machine could result
fatal for the operator or the
machine.
•
When moving off, check the route
area is safe and sound the horn
before moving. If necessary, clear
all personnel and obstacles from
the machine and the path.
•
Never carry out abrupt movements,
since it could result dangerous for
the security of the operator and the
machine.
•
Be extremely careful with curves.
Slow down while running in a
curve. Do not change the direction
when the machine is at high speed.
•
Avoid performing the working
equipments when the machine is
running at high speed.
•
Position the rear view mirrors suitable for you before moving machine. Be extremely
careful while moving machine reversely.
A
B
C
H
G
D
E
F
