SWTL4518 Operation & Maintenance Manual
12
4)
When connecting the cables, turn ignition keys of both the problem machine and
normal machine to the position of OFF.
5)
The correct connecting method is parallel (positive to positive and negative to
negative).
6)
Connect the positive (+) cable first when installing the booster cables. Disconnect
the negative (-) cable fist when removing them.
(3) Moving The Machine
•
Before move the machine, engage the horn to give an alert to the persons around.
•
When moving machine, lower the boom and fold the bucket completely to get better
stability. Meanwhile it will keep enough space required by the movement.
•
Keep low speed when moving on rough ground and in tough space.
Before moving backward check the area behind the machine and make sure there are no
persons or obstacles behind.
(4) Moving On Slopes
•
Before move on slopes, make sure the parking brake
is in good operation condition.
•
Do not change the direction while moving on slopes
and try to avoid moving obliquely on slopes.
•
When the bucket is empty, keep the bucket
downward. When the bucket is loaded, keep the
bucket upward.
•
Keep the bucket lowed and folded.
•
Lower the bucket to the ground immediately in case
of emergency to help stop the machine.
•
When the slope is covered with wet grass or
thick leaves, it becomes extremely slippery. Do
not move the machine on this kind of slopes.
•
Do not move the machine on a slope with
inclination more than 15
°
.
•
If the fuel gauge indicates in red range,
immediately refuel. Inclination of machine may
make the engine suck air and stop suddenly if the fuel level is low.
RIGHT
WRONG
