SUNWARD SWE50B, Руководство по эксплуатации и техническому обслуживанию

Страница: 40 / 197

33

Check the torque of detectable fastener. (refer to the torque specifications of fastener in the maintenance
part)
(4) After first 100 hours operation
Carry out every 50 hours and 100 hours maintenance. (refer to maintenance guide.....fifty hours and 100 hours)
3.3 ENGINE OPERATION
Daily inspection before operation (As figure 3.3.1)
(1) Electrical system
Check whether there are abraded or cracked wire and slack connector or not, and check
whether the light can be turned on or off normally or not.
(2) Boom, arm, bucket, dozer blade, sheet metal, track shoe
Check whether there are curving, damaged, and lost parts or not.
(3) Fastener
Check whether there are slack or lost parts or not.
(4) Fuel system
Drain the water and sediment in the fuel tank.
(5) Hydraulic system
Check the leakage, hose twist, the abrasion between pipe and hose or other parts.
(6) Lubrication
Check the appointed lubrication points listed in the periodic
maintenance table.
(7) Protection device
Check shield and mud shield.
(8) Safety
Keep all people away from machine, and remove barrier.
Inspection before starting engine
Place the machine on a horizontal ground, check the engine oil level (stop engine, the engine oil will return to
the tank 15 minutes later)
Figure 3.3.1
Figure 3.3.2