SUNWARD SWE18UF, Руководство по эксплуатации и техническому обслуживанию

Страница: 41 / 120

OPERATION & MAINTENANCE MANUAL SWE18UF
35
If the control lever comes back to the neutral position while it is traveling down
the slope, the machine will automatically stop.
If the machine slides while traveling up on the slope, use the pulling power of the
boom to help the machine climb up the slope.
If engine stops accidentally while traveling down the slope, set the control lever
back to the neutral position to stop the machine, lower the bucket to the ground to
block the machine and then restart the machine.
FIG. 3-16
90
0
～
110
0
20
～
30cm
FIG. 3-17
20
～
30cm
90
0
～
110
0
FIG. 3-18
5)
If the excavator can’t travel for getting into miriness,
you can extend arm and place bucket to ground to
lift one side of crawler, then turn the lifted crawler
to clean out the bedload. In order to reduce the force
enduring of boom and arm, the angle between
boom and arm should be in the range of
90

--110

(FIG. 3-14).
6) When the machine gets into wallow or passes
raceway, you can use arm and boom to help
the machine pass (FIG. 3-15).
7) The machine must travel in the pose shown
in fig 3-16 when traveling up on a slope of
15° or more.
8) The machine should travel at low speed and
in a pose shown in FIG. 3-17 when it is
traveling down on a slope of 15° or more.