SUNWARD SWE18UF, Руководство по эксплуатации и техническому обслуживанию

Страница: 27 / 120

OPERATION & MAINTENANCE MANUAL SWE18UF
21

Before leaving the operator’s seat, set the safety lever securely to lock position.
If any controls should be touched accidentally when the safety lever has not been
locked, it may cause serious accident.
 Make sure the engine is stopped and safety lever is set to lock position before
leaving the operator’s seat.
 Carefully push or pull the safety lever, do not touch other levers.

The safety lever can lock the work lever of front device (left & right operation
joystick). Therefore, there will be no impact when the left & right operation lever
is touched by accident; but you should know that the safety lock lever is not used
for the operation of dozer (undercarriage extension) lever, left & right travel
control lever, boom swing control pedal, assistant control pedal.
2.8 PILOT SAFETY LEVER

When pulling the safety lever up to the lock position, the whole front work device will not be
able to work.

Push the safety lever to release position.

Lower bucket (front work device) to ground and put all the control levers on, stop the
machine.
 When the engine does not work, safety lever is on “release” position and the starting
switch is on, by pushing handle can the machine work. The battery can supply the movement
of control valve with pressure.

If the front work device can still work when the safety lever is on “Release” position,
and all the control levers are at “Neutral”，that means there are some malfunctions
of the system. Push the safety valve to “Lock” position, turn off the engine switch
at once and contact the nearest sunward dealer.