SUNWARD SWE18UF, Руководство по эксплуатации и техническому обслуживанию

Страница: 24 / 120

OPERATION & MAINTENANCE MANUAL SWE18UF
18
Press down this button, the system working light comes on, and it goes out after pressing this button again.
5 — High travel speed indicator light
Press down this button to change to high speed, after pressing it again to change to low speed.
6 — Warm-up indicator light
If the machine has to start in cold weather, put the key at warm-up position and this signal will light up; at the
same time, the screen shows “warming up”, after 15second, it shows “warming up finished”.
7 — Charging indicator light
This indicator indicates the status of engine charging. When system is powered on and the engine is not started,
this symbol light comes on; If charging signal is cut off or the sensor is damaged, the buzzer will sound and
“abnormal charging” will display on the screen; After starting the engine, the charging is normal and the
symbol light turns off. If charging is abnormal, the symbol light comes on and buzzer will sound and
“abnormal charging” will display on the screen.
8 — Air filter clogged indicator lamp
When the air filter element is clogged, red indicator light comes on. Please clean or replace outer core.
9 —Flameout control indicator light
This symbol light comes on when the engine working condition is abnormal (the engine oil pressure is low or
coiling water temperature is high); and the buzzer warning ; after 30seconds engine stops working.
10— Coolant temperature indicator
It displays engine coolant temperature. If the coolant temperature is normal, the green area is pointed; If too
high, the red area is pointed.
11— Mute button
When the monitor warns, press this button can stop the sound of buzzer alarming.
12—High travel speed control button
Press this button, the machine will travel at high speed; press the button again, it will travel at low speed.
13— Time
It displays the time.
14— Working Light control button
Press this button, the working light comes up.
15—Screen switch button
Press this button, the screen will show the working hour and speed; press the button again, it will show the
time and date.
16— Working hour meter
It displays working hours of the machine.
17—Fuel level indicator
This indicates the fuel level. The pointer is within green range when the fuel level is normal; if it goes into the
red range, it means fuel in tank is lower than 10%; the LCD will flicker with buzzer alarming.
18— Engine speed meter
It displays speed of the working engine.
2.4 ROCKER SWITCH
1— Rocker Switch of Dozer blade/chassis retraction:
The default mode is for dozer blade. After pressing it down, it’s changed to the mode of chassis retraction.