Serial Flash Programmer[S550-SFWv3] Operation Manual
109
9.
Messages and Warnings
9.1.
Message Dialogs
Display
Contents
S550-SFWv3 already started.
Displayed when trying to start up the control software while
The control software has been started already.
There is not enough space to start S550-SFWv3.
Displayed when the free disk space is less than 1M byte while
trying to start up the control software.
Do you really want to exit?
Displayed while trying to exit from the control software.
Do you really want to exit?(discard your
settings)
Displayed when the settings have not been saved while trying to
exit from the control software.
Users Manual open error.
Displayed when the manual cannot be opened.
Users Manual not found.
Displayed when the manual does not exist.
Device definition file 'xxx' not found.
Displayed when the device definition file does not exist.
Device definition file 'xxx' open error.
Displayed when the device definition file cannot be opened.
Device definition file 'xxx' format error.
Displayed when the device definition file format is invalid.
This file includes data addressing non-ROM
area of the selected device. Does it continue
as it is?
Displayed while trying to load a program file that contains data
in the data area when the target device does not have any data
area.
ROM file open error.
Displayed when the program file could not be loaded.
ROM file format error.
Displayed when the program file format is invalid.
System memory error.
Displayed when the temporary memory used during loading the
program file could not be ensured.
ROM file invalid address contained error.
Displayed when a program file that contains an invalid address
data is loaded.
ROM file write error.
Displayed when a programming error occurred while saving the
loaded program data to a file.
Project file 'xxx' not found.
Displayed when the project file could not be loaded.
Device definition file 'xxx' format error.
Displayed when the project file format is invalid.
Device selected not found.
Do you want to make new project?
Displayed when the project file does not exist or the device in
the project file does not exist in the device definition file while
starting up the control software.
Do you want to initialize?
Displayed when initializing device setting information.
Would you like to update firmware?
Displayed when the firmware needs to be updated.
System memory error.
Displayed when the required memory could not be obtained.
Please input hex value.
Displayed when a value other than hexadecimal value is entered
while a hexadecimal value is required for the item.
Invalid address contained error.
Please address value in the range of blocks.
Displayed when specifying an address other than valid ROM
area for the set device.
Invalid address range error.
Please set end address value that is larger than
start address.
Displayed when specified end address value is smaller than the
value of the start address.
Do you want to replace modified file?
Confirmation whether to validate the edited contents or not.
Do you want to move main view?
Confirmation whether to go back to the main screen,
Do you want to move main view?(discard your
settings)
Confirmation whether to discard the settings and go back to the
main screen.
