Serial Flash Programmer[S550-SFWv3] Operation Manual
43
6.2.
Device Setting Screen
6.2.1.
Device Setting Screen
<<Device section>>
Items
Descriptions
Select MCU manufacturer.
Select MCU series.
Select MCU model.
Shows communication method.
・
Single-wire: Single wire Clock-asynchronous serial I/O
・
Clock synchronous: Clock-synchronous serial I/O
・
Clock synchronous: Clock-synchronous serial I/O[No handshake]
・
UART: Clock-asynchronous serial I/O
*Communication will differ depending on the target.
Select baudrate.
・
Single-wire:
9.6Kbps - 460.8Kbps
・
Clock synchronous:
125Kbps - 4Mbps
・
UART:
9.6Kbps - 460.8Kbps
*Baudrate will differ depending on the target clock, etc.
Select voltage supplied from S550-SFWv3.
・
No Supply: Select this option when supplying voltage from external
power source to the target board.
*The voltage will not be supplied from S550-SFWv3.
・
3.3V/5V: Select either when supplying voltage from S550-SFWv3
to the target board.
Opens the input vcc setting screen. (See “6.2.12 Input Vcc Setting
Screen”.)
Shows clock frequency.
