Sunny Giken S550-SFWv3 Скачать руководство пользователя страница 108

Страница: 108 / 123

Serial Flash Programmer[S550-SFWv3] Operation Manual

107

8.3.4.

Programming Information Display

The S550-SFWv3 displays the programming information of the data stored in the internal memory of the main

unit on the center display. Following shows how to see the information.

*When there is no data downloaded to the internal memory, the display does not change to “

Programming Information Display Mode

”.

Also, when the S550-SFWv3 main unit is in energy saving mode, the display does not change to “

Programming Information Display

Mode

”

①

Move to “

Programming Information Display Mode”

・

When center display is in the “

Checksum Display Mode

”, press the “FUNC” switch on S550-SFWv3 once,

and ”

”,”

” appear on the center display.

②

Show programming information

・

After ”

”,”

” are displayed on the center display, press the “START” switch on S550-SFWv3 once, and the

MCU, TYPE, and Action Mode are displayed.

*”When there is no operation for 3 seconds after “

”,”

” are displayed, the center display goes back to the “

Normal Display Mode

”.

・

The checksum is automatically scrolled.

③

Exit “

Programming Information Display Mode

”

・

Press the “FUNC” switch on S550-SFWv3 once to go back to the “

Normal Display Mode

”.

(Multi Data Mode)

“Programming Information Display Mode”

shows ”1.”,”

” through ”

”,”

” on the center display.

8.3.5.

Error Information Display

The S550-SFWv3 displays the previous programming error information on the center display. Following shows

how to see the information.

*When there is no data downloaded to the internal memory, the display does not change to “

Error Information Display Mode

”. Also, when

the S550-SFWv3 main unit is in energy saving mode, the display does not change to “

Error Information Display Mode

”.

①

Move to “

Error Information Display Mode

”

・

When center display is in the “

Programming Information Display Mode

”, press the “FUNC” switch on

S550-SFWv3 once, and ”

”,”

” appear on the center display.

②

Shows error information

・

Within 3 seconds after ”

”,”

” are displayed on the center display, press the “START” switch on

S550-SFWv3 once, and the error information is displayed.

*When there is no operation for 3 seconds after “

”,”

” are displayed, the center display goes back to the default screen.

*For details of error information, check the error information details (See “9.4 List of Error Information on Center Display”)

③

Exit “

Error Information Display Mode

”

・

Press the “FUNC” switch on S550-SFWv3 once to go back to the default screen.

(Multi Data Mode)

“Error Information Display Mode”

shows ”

”,”

” through ”

”,”

” on the center display.

Содержание S550-SFWv3




























































































































Результаты поиска

Содержание S550-SFWv3

Отзывы:

Sunny Giken S550-SFWv3, Руководство по эксплуатации, Страница: 108 / 123

Результаты поиска

Содержание S550-SFWv3

Отзывы: