Serial Flash Programmer[S550-SFWv3] Operation Manual
36
<Information section>
Items
Descriptions
Shows MCU manufacture.
Shows MCU series.
Shows MCU model.
* The device displayed (ECC) after the device name can write the E2 data
flash in [ECC Available].
* The device displayed (NO ECC) after the device name can write the E2
data flash in [No ECC].
Shows total ROM block size.
Shows the process executed.
Shows the user’s program name with the path.
Shows the check sum of all areas, user area and data area in
the user’s program. (Lower 2 bytes of the data after all data
is summed up by every byte are shown. The addresses not
included in the user’s program are calculated as FFh.)
* The user area check sum indicates the check sum of the User area. The
data area check sum indicates the check sum of other areas.
<Setting section>
Items
Descriptions
Moves to device setting screen.
(See “6.2.1 Device Setting Screen”.)
Moves to maintenance screen.
(See “6.3.1 Maintenance Initial Setting Screen”.)
Deletes each data in “Multi Data Mode”.
Copies one data onto another arbitrary data in “Multi Data
Mode”.
<Action section>
Items
Descriptions
Initializes all S550-SFWv3 internal memory.
* Pressing the start button on S550-SFWv3 for 5 seconds executes the same
operation.
Uploads the program data stored in S550-SFWv3 to the
control software.
Downloads the set program data to S550-SFWv3.
* When the program data on S550-SFWv3 and the data on the control
software match, downloading will not be executed.
Stores the set program data on S550-SFWv3 and moves to
the execution screen (Program).
Exits the control software.