EVERGEN M SERIES USER MANUAL
INSTALLATION
23
Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | [email protected]
4. Install Fixture
1
2
Route the fixture cable through the grommet in the solar panel mount, then into the top of the tenon
adapter, through the pole, and out of the fixture arm exit hole in pole.
Route the fixture cable through the fixture arm.
FIXTURE CABLE ROUTING AND MOUNTING INSTRUCTIONS VARY DEPENDING ON
SYSTEM CONFIGURATION.
N
NOTE
OTE
3
Attach the fixture arm to the pole.
4
5
Mount the fixture on the fixture arm as per the manufacturer's instructions.
Route the fixture cable into the fixture and mount the fixture on the fixture arm.
6
Connect each of the fixture cable wires to the corresponding fixture wires using the supplied wire connectors.
H
FIXTURE
WIRES
FIXTURE
CABLE
GROUND
WIRE
WIRE
CONNECTOR
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
TITLE
B
1:24
-
EVERGEN MANUAL IMAGES
4 OF 4
82064-3
SHEET
SIZE
REVISION
SCALE
DRAWING NO
CAD REFERENCE
250 Bay Street
Victoria, BC Canada V9A 3K5
Tel [250] 380-0052
Fax [250] 380-0062
CHANGES SHALL BE INCORPORATED
ELECTRONICALLY BY THE DESIGN AUTHORITY
PDM MAINTAINED DATA
PROPRIETARY
COPYRIGHT © 2012 ALL RIGHTS RESERVED. NO
PART OF THIS
DOCUMENT MAY BE REPRODUCED
STORED IN A
RETRIEVAL SYSTEM, OR
TRANSMITTED IN ANY
FORM,
ORIGINALLY DESIGNED BY
ORIGINALLY DRAWN BY
CHECKED BY
DATE
DATE
DATE
Ben Jolie
Ben Jolie
06/19/2017
06/16/2017
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAWING
INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.100-2000
TOLERANCES APPLY AS SHOWN BELOW
DECIMALS SURF FINISH ANGLES
.X
.XX
.XXX
.XXXX
± .1
± .01
± .005
± .0005
63
1
INCHES
THIRD ANGLE PROJECTION
DOC #
DATE
21/12/11
57012
B
DOC REVISION
82139
ALL COMPONENTS AND PROCESSES TO BE ROHS COMPLIANT, CERTIFICATE REQUIRED WITH INITIAL SHIPMENT
