Sunna Design Sol EVERGEN M Series, Руководство пользователя

Страница: 2 / 35

EVERGEN M SERIES USER MANUAL
2
Sol by Sunna Design | 990 Biscayne Boulevard, Office 701, Miami, FL 33132, USA | 1.800.959.1329 | customerservice@solarlighting.com
N NOTE OTE
IMPORTANT
Keep your product order information. You will need it during setup.
The EverGen lighting system must be activated after assembly and installation using
the EverGen Setup App. Otherwise, the light will not turn on and an additional site
visit will be required.
To complete activation:
1. Download the EverGen Setup App from the iOS App Store or Google Play store and
ensure you have a compatible mobile device.
2. Use the signup tab to create an account.
3. A verification email will be sent to the email address you used to create the account.
Open the email and verify your account.
4. Switch from the signup page to the login page and enter your email and password.
5. Once inside the EverGen Setup App workspace, enter your order number
(ORDXXXXXX).
6. Go to the location of the EverGen lighting system, connect to the light and follow the
Setup App to activate.
If you do not have wireless internet access onsite, use the app to
download product information for your order before travelling to the
offline site. Activation can then take place onsite without a wireless
signal. Contact us for best practices for working in remote areas.
EverGen firmware may be periodically released to improve
performance. Firmware updates are managed by the app during the
initial connection. Updates are mandatory and the process takes
about 45 seconds.
N NOTE OTE
N NOTE OTE
This installation and instruction manual provides installation instructions for the Sol EverGen Series solar LED lighting
systems. The entire contents of this manual should be thoroughly reviewed and understood prior to installing this
equipment. Do not discard this manual, as it contains complete installation instructions.
To ensure proper operation of this equipment, it is important that the equipment be used only for its intended
purpose. Any use of this equipment for purposes other than those intended will void all warranties.