Sundance Spas 780 series, Руководство пользователя

Страница: 47 / 76

Page 41
780 Series
Draining Procedures:
1. Turn off power to spa at breaker.
2. Locate and remove the front synthetic cabinet door
(page 44). The door is located directly below the
control panel.
3. Locate drain hose line attached to the 2 x 4 wood
slat, Figure A.
4. Pull drain hose from equipment area, Figure B.
5. Hold drain hose above water line, then unthread drain
cap (1) from hose using a counterclockwise rotation.
Place hose on ground making sure to direct water
away from spa.
6. After spa has completely drained, reinstall drain cap
on drain valve finger tight! DO NOT OVERTIGHTEN!
7. Place drain hose back inside the spa equipment bay.
8. Reinstall synthetic cabinet door.
9. After refilling spa, turn on power and follow the “Spa Fill Up
Procedure” (page 18).
11.3 Pillow Care
Remove and clean the headrest pillows as needed
with soapy water using a cloth or soft-bristle brush.
Always remove the pillows when adding chemical shock
treatment to the spa water. The pillows can be returned to the spa when
the sanitizer reading is stable as recommended on the inside cover of
the manual.
Pillow Removal/Cleaning Procedure
Figure A
Figure B
1
1 2
Place both hands on
pillow with thumbs as
shown.
Press inward with
thumbs to curl pillow
lip inward so you can
grab it with fingertips.
3
4
5
Flex pillow lip inward
2-3" to get a good
grip on the ends.
Gently pull outward on
pillow to release mounting
stud from receptacle on
spa shell.
Wash pillow(s) in a mild detergent soap and warm water solution. Never machine wash your pillows
or attempt to clean them with a non-approved vinyl cleaning agent!
6
To reinstall pillows: Simply align pillow over mounting stud receptacle, then gently push inward to
snap in place.