Sundance Spas 780 series, Руководство пользователя

Страница: 44 / 76

Page 38
780 Series
11.0 Spa Maintenance
Proper and regular maintenance of your spa will help it retain its beauty
and performance. Your authorized Sundance dealer can supply you with
all the information, supplies and accessory products you will need to
accomplish this.
DANGER:
RISK OF SEVERE INJURY OR DROWNING
BY ENTRAPMENT!
• Keep hair, loose articles of clothing or hanging jewelry away from
suction fittings, rotating jets or other moving components to avoid
entrapment that could lead to drowning or severe injury.
• Never use the spa unless all suction guards, filter, filter lid, or
skimmer assembly are installed to prevent body and/or hair
entrapment.
• Never operate or use the spa if the filter, filter lid, or skimmer
assembly are broken or any part of the skimmer assembly is
missing. Please contact your dealer or nearest service center for
service.
• The suction fittings and suction covers in this spa are sized to
match the specific water flow created by the pump(s). If it is
necessary to replace the suction fittings, suction covers or pump(s),
be sure that the flow rates are compatible and are in compliance
with the VGB Safety Act page 2.
• Never replace a suction fitting or suction cover with one rated less
than the flow rate marked on the original suction fitting. Using
improper suction fittings or suction covers can create a body or hair
suction entrapment hazard that may lead to drowning or severe
injury.
• Owners must alert all spa users to the potential risk of Hair, Limb,
Body, Evisceration (disembowelment), and Mechanical Entrapment,
page 6.
!
11.1 Cleaning The Filter
Your new spa is equipped with an exclusive MicroClean® 2-stage
filter cartridge located under the filter lid. Fine debris are filtered by the
circulation pump drawing water through the ultra-fine (stage 2) cartridge.
Larger debris are filtered by the main 2-speed pump drawing water
through the (stage 1) polyester mesh (pleated) cartridge during normal
operation and during each filtration/heating cycle. Combined, both filter
halves work together to give you unsurpassed water quality by trapping
suspended particles on their outer surface.
Note: To ensure optimum performance, clean and reuse the stage
1 cartridge once a month and replace the stage 2 cartridge every 3
months, or as needed.