Sundance Spas 780 series, Руководство пользователя

Страница: 32 / 76

Page 26
780 Series
Keep a record of your serial number and passcode for any future
reference. Write that information below.
Serial Number:
Passcode:
9.2 Completing Your Registration
Once the hot tub is registered online, you will continue the process at the
hot tub control panel. You will need to enter the serial number and pass-
code given when you registered online. Follow the steps below.
Note: The control panel does not have a back button. If an incorrect
number is entered you must complete the entire registration steps. At that
point, the system will return an “INCORRECT PASSCODE” message.
A.
Entering the Serial Number and Passcode (if applicable)
1. Press until you get to the “S\N” Menu. The display will scroll
“SET SERIAL NUMBER.” This menu will only appear once, when
the hot tub is first installed.
Note: Once a valid serial number and passcode have been entered,
this screen will not appear again.
2. Press
1
to prepare the system.
3. Enter the serial number. Using the or buttons you can cycle
through the numbers 0 to 9. If your serial number begins with a letter,
use the or buttons until the letter is displayed.
4. Once you reach a desired number release the button. Press
1
after selecting each of the numbers and allow the cursor to move to
the next selection. After the last number is saved, proceed to enter
the passcode.
5. Using or you can cycle through the numbers 0 to 9.
6. Once you reach a desired number release the button. Press
1
after selecting each of the numbers and allow the cursor to move to
the next selection.
7. If the passcode is correct, the display will scroll “PASSCODE
ACCEPTED.” If there was error, the display will scroll “INCORRECT
PASSCODE.” You will need to re-enter the passcode.
9.3 Setting Water Temperature
The spa’s thermostat provides optimum control of water
temperature. The temperature setpoint (set temperature) can
be adjusted from 65-104°F (18-40°C). To raise the set tem-
perature, press the WARMER ( ) button. To lower the set tempera-
ture, press the
COOLER
( ) button. The first press of either button
displays the set temperature. To access the overtemp feature, that allows
the hot tub to reach 106°F (41°C), follow the steps that follow.