Sundance Spas 780 series, Руководство пользователя

Страница: 37 / 76

Page 31
780 Series
10.0 Menu Features and Programming Instructions
Your hot tub is equipped with menus that allow you to program additional
features. By continually pressing the Menu ( ) button you will cycle
through the menus as follows (Figure 10.0a):
Current temperature (Main Menu)
Primary Filtration (page 31)
Secondary Filtration (page 32)
Heat (page 33)
Filter Change (page 34)
UV (page 34)
H2O (page 35)
Time (page 35)
Date (page 36)
Temp (page 36)
Language (page 36)
Lock (page 37)
WiFi (50Hz models only - optional)
S\N (page 25)
10.1 Primary Filtration Menu
During the primary filtration cycle, the circulation pump and CLEAR RAY
are activated. The hot tub is programmed with a default setting starting
at 12:00 AM and lasting for 8 hours, but this can be changed. This cycle
allows the circulation pump to run for a preset amount of time per day, in
addition to the normal operation.
Note:
Any time the circulation pump runs outside of a program cycle,
e.g. for heating, that run time will be deducted from the next primary
filter cycle. For example, the primary filter cycle is set to 8 hours every
24 hours but the circulation pump comes on for 2 hours to heat the
water after the cycle has finished. The next primary filter cycle will only
be for 6 hours not 8 hours.
Figure 10.0a