Sundance Spas 780 series, Руководство пользователя

Страница: 31 / 76

Page 25
780 Series
9.0 Operating Instructions
The hot tub control system has automatic functions that operate upon
start-up and normal operation to protect the system. Upon the first power
up, the readout displays the following information:
1. Control panel displays all lit indicators, permitting visual inspection of
all display segments and indicator lights for proper operation.
2. Control panel displays the controller and control panel software
versions.
3. Control panel scrolls the message, “ WELCOME TO SUNDANCE
SPAS
.”
4. Control panel scrolls the message, “ PLEASE REGISTER YOUR
SPA AT WWW SUNDANCESPAS COM .”
Note: It is common for the heater to turn on after the hot tub is first
filled because tap water is often very cold. If water temperature, at
this time, is less than the factory default temperature setting of 100°F
(38°C) the heater will turn on and run until the water temperature rises
to the factory setting, then turn off.
9.1 Register Your New Hot tub
Registering your hot tub is important in order to validate your warranty.
To register you will need to have the hot tub serial number, Figure 9.1,
then you will need to register online in order to receive a passcode. The
passcode must be entered on the control panel in order to unlock the
registration lockout.
If this option is skipped, you will be able to activate components, but,
after 10 minutes, the screen will revert back to the registration screen.
This process will continue until the hot tub is registered and the passcode
is entered.
Note
: The hot tub will still protect itself if an error is detected.
To register your hot tub you need to have
your hot tub serial number. The best time to
retrieve the serial number is when the hot
tub is being connected. You must register
your hot tub via the internet at
www.SundanceSpas.com.
Follow these steps to register your hot tub.
1. Using your home computer or other device, connect to the internet.
2. Go to www.SundanceSpas.com website to register your hot tub.
3. Click Owner Resources
4. Click Warranty Registration
5. Enter your serial number.
6. Click Next to continue to complete your registration.
7. Once registered, you will be given a passcode that will need to be
entered into the control panel (Section 9.2, page 26).
Figure 9.1
Serial
Nameplate