![background image](http://html1.mh-extra.com/html/sunbeam/sck02smwbs/sck02smwbs_user-manual_1394383007.webp)
7
INSTALLATION INSTRUCTIONS
INSTALLING THE CASTORS
Install the four castors provided into the unit’s bottom. The two metal gaskets are used on the front
two castors.
•
INSTALLING THE CO
2
CYLINDER SUPPORT
Install the metal support provided onto the 4 studs located on
the exterior back wall.
Align the holes in the support with the studs and push down
fi
rmly.
•
•
INSTALLING THE CO
2
CYLINDER
Install your fully-charged cylinder into the support stand.
•
INSTALLING THE CO
2
REGULATOR
Attach the CO
2
regulator to the cylinder by turning the
regulator nut onto cylinder valve, making sure washer is
securely inserted into connecting nut.
Tighten using an adjustable wrench (not supplied) and assure
there are no leaks.
•
•
INSTALLING THE CO
2
AIR LINE TO OUTSIDE CABINET
Remove plug located at the exterior back (top left corner).
Save it for later use if you decide to convert unit to an “all-
refrigerator”.
Insert the open end of the air line (red) from the cabinet
through the uncovered hole.
•
•