Sun Oracle Sun Blade T6340, Руководство по установке и администрированию

Страница: 70 / 82

60 Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
Use the ILOM service processor
reset /SYS
command, or
start /SYS
and
stop /SYS
commands, to reset the server module. For example
▼
To Reset the System Manually
1. Type:
The
auto-boot?
setting is permanent. The setting remains
false
until
deliberately changed.
2. Press Enter.
3. Type:
Reaching the
ok
prompt by performing a manual system reset or by power cycling
the system should be the method of last resort. Using these commands results in the
loss of all system coherence and state information. A manual system reset could
corrupt the server module file systems, although the
fsck
command usually
restores them. Use this method only when nothing else works.
Caution – Accessing the
ok
prompt shuts down the Solaris OS. You cannot return
to the Solaris OS without rebooting the OS, for example with the
boot
command.
▼
To Shut Down the Server Module Using the Break Key
or the Equivalent Pair of ILOM Commands
When it is impossible or impractical to shut down the system gracefully, you can get
to the
ok
prompt, if you have an alphanumeric terminal attached to the server
module, by pressing the Break key.
The equivalent method uses the following pair of commands:
-> set /HOST/bootmode script="setenv auto-boot? false"
-> reset /SYS
-> start /SP/console