Sun Oracle Sun Blade T6340, Руководство по установке и администрированию

Страница: 36 / 82

26 Sun Blade T6340 Server Module Installation and Administration Guide • April 2010
The ILOM software displays the current MAC address.
b. Write down the MAC address and use it to configure your DHCP server.
5. View the IP address that DHCP has assigned to the server module SP.
After a valid IP address has been assigned to the server module, view the IP
address. Refer to
Step 3 .
▼
To View or Configure the IP Address for the Server
Module SP Using Static IP Addresses — Through the
UCP and Dongle Cable
1. Connect to the server module SP through the front-panel UCP using the serial
connector on the dongle cable.
Refer to “Connecting to the Server Module SP Using a Dongle Cable” on page 19 .
2. (Optional) View the IP address.
■
To see all the IP address-related information, type:
.
■
To see only the IP address, type:
3. Follow the instructions in “To View or Configure the IP Address for the Server
Module SP Using Static IP Addresses — Through the CMM” on page 22 , starting
with Step 3 .
-> show /SP/network macaddress
-> show /SP/network
-> show /SP/network ipaddress