Sun Oracle Sun Blade T6340, Руководство по установке и администрированию

Страница: 41 / 82

Chapter 2 Installation and Configuration 31
After the root password has been set, on subsequent reboots, the ILOM CLI login
prompt is displayed.
Powering On the Host
After the service processor boots, the ILOM CLI prompt (->) is displayed the first
time the service processor is booted.
1. Type the
start /SYS
command.
You see an ILOM
->
prompt on the system console. This indicates that the system
has reset. Issue the
start /SYS
command:
2. Type the
start /SP/console
command.
The system may take six to 15 minutes to run POST diagnostics and boot. After
you type the
start
commands, the CPU and memory controllers initialize, and
eventually the OpenBoot PROM (OBP) firmware initializes. If a boot device
installed with the Solaris OS is accessible locally, that device will be booted.
Otherwise, the system will use the
boot net
command to seek a boot device on
the network.
-> set /SP/users/root password
Enter new password: *******
Enter new password again: *******
->
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.
0:0:0>Scrub Memory....Done
0:0:0>SPU CWQ Tests...Done
0:0:0>MAU Tests...Done