Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide
19
FIGURE 12
Lowering the CPU Module Into the Threaded Inserts
3. Tighten both captive screws by hand until the screws contact the threaded inserts
of the CPU shroud.
Once the CPU module is seated, surface contact between the captive screws and the
threaded inserts of the shroud typically occurs in less than one turn of both left and
right captive screws.
1
2
Threaded
inserts (2)
CPU shroud
CPU module
Captive
screw (2)
