Sun Microsystems UltraSPARC III Cu Module, Руководство по установке

Страница: 12 / 34

4 Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu Module Installation Guide • June 2004
CODE EXAMPLE 1
Identifying a Workstation CPU Using
prtdiag
Note – The 1.050 GHz CPU appears as 1056 MHz. UltraSPARC-III+ indicates a Cu
module.
Module Label Method
All Cu CPU modules have an UltraSPARC III Cu label on the front of the CPU
module. See
FIGURE 1
and
TABLE 1
.
A part number label is also affixed to the printed circuit board of every CPU module.
Note – Avoid removing modules just to check the part number. First use the
prtdiag
command or verify Cu modules by reading the label on the UltraSPARC III
Cu module.
% /usr/platform/SUNW,Sun-Blade-1000/sbin/prtdiag
==================================== CPUs ====================================
E$ CPU CPU Temperature
CPU Freq Size Implementation Mask Die Amb. Location
--- -------- ---------- ------------------- ----- ---- ---- --------
0 1056 MHz 8MB SUNW,UltraSPARC-III+ 2.3 76C 21C +-board/cpu0
1 1056 MHz 8MB SUNW,UltraSPARC-III+ 2.3 78C 21C +-board/cpu1
TABLE 1
CPU Module Part Number, Speed, and Type
Part Number
Prefix
CPU Module Speed and Type CPU Label System
501-6002 xxxxxx 900 MHz UltraSPARC III Cu USIII Cu
Sun Blade 1000
Sun Blade 2000
501-6299 xxxxxx 1.015 GHz UltraSPARC III Cu USIII Cu-A
501-6395 xxxxxx 1.015 GHz UltraSPARC III Cu USIII Cu-A
501-6254 xxxxxx 1.050 GHz UltraSPARC III Cu USIII Cu-B
501-6396 xxxxxx 1.050 GHz UltraSPARC III Cu USIII Cu-B
501-6485 xxxxxx 1.200 GHz UltraSPARC III Cu USIII Cu-C Sun Blade 2000