Sun Microelectronics
307
A. Debug and Diagnostics Support
DC
:
LSU.D-Cache_enable. If cleared, misses are forced on D-Cache accesses
with no cache fill. A FLUSH, DONE, or RETRY instruction is needed after
software changes this bit to ensure the new information is used.
A.6.2 MMU Control
IM
:
LSU.enable_I-MMU. If cleared, the I-MMU is disabled (pass-through
mode).
DM
:
LSU.enable_D-MMU. If cleared, the D-MMU is disabled (pass-through
mode).
Note:
When the MMU/TLB is disabled, a VA is passed through to a PA.
Accesses are assumed to be non-cacheable with side-effects.
A.6.3 Parity Control
FM<15:0>
LSU.parity_mask. If set, UltraSPARC writes will generate incorrect
parity on the E-Cache data bus for bytes corresponding to this mask. The
parity_mask corresponds to the 16 bytes of the E-Cache data bus.
Note:
The parity mask is endian-neutral.
A.6.4 Watchpoint Control
Watchpoint control is further discussed in Section A.5, “Watchpoint Support,” on
page 304.
Table A-2
LSU Control Register: Parity Mask Examples
Parity
Mask
Addr of Bytes Affected
FEDC BA98 7654 3210
0000
16
0000 0000 0000 0000
0001
16
0000 0000 0000 0001
2222
16
0010 0010 0010 0010
FFFF
16
1111 1111 1111 1111
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com