Sun Microsystems Sun Fire X4100, Примечания к продукту

Страница: 73 / 82

Hardware Issues 59
Non-Recommended Optical Mouse Devices and
Keyboards (6299692, 6317710, 6304725)
The following Sun optical mouse devices are not recommended for use on the Sun
Fire X4100 or Sun Fire X4200 servers:
■
Type 5c
■
Type 6c
The following two keyboards are not recommended for use on the front bottom USB
port on the Sun Fire X4200 server.
■
Microsoft Digital Media Pro keyboard (this issue, 6304725, is fixed for this
keyboard in Release 1.1, and it can be used in systems with the Release 1.1
upgrade).
■
Belkin keyboard.
Support for New 4-GB DIMMs Requires Gasket
Installation and Upgrade to BIOS 36
Note – If you are installing 4-GB DIMMs to a Sun Fire X4100 or Sun Fire X4200
server that did not previously have 4-GB DIMMs installed, you must first have
BIOS 36 or later installed. BIOS 36 was included with Software Release 1.2.1. Refer to
the
Sun Fire X4100 and Sun Fire X4200 Servers Release Notes For Software Release 1.2.1 ,
819-4344.
Caution – If you install 4-GB DIMMs in a Sun Fire X4100 or Sun Fire X4200 server
that did not previously have 4 GB DIMMs, you must install gaskets on the main
cover to ensure containment of electrical emissions.
Use the following procedure to install the 4-GB DIMMs and gaskets.
1. Ensure that the DIMM slot ejectors at each end of the memory socket are fully
open (rotated outward) to accept the new DIMM.
2. Align the notch in the bottom edge of the DIMM with the key in the DIMM
socket.
3. Press down evenly on both top corners of the DIMM until the ejectors snap over
the cutouts in the left and right edges of the DIMM.