Sun Microsystems Sun Fire X4100, Примечания к продукту

Страница: 60 / 82

46 Sun Fire X4100 and Sun Fire X4200 Servers Product Notes • November 2006
Cannot Access External Storage Attached to
Emulex and Qlogic HBA Cards During RHEL3 U8
Installation (6447329)
If you have Emulex and QLogic HBA cards installed in your server, you might not
be able to access external storage during RHEL3 U8 installation because the installer
software does not load the appropriate kernel modules automatically. You therefore
cannot perform setup and initialization of any external storage devices that are
connected to those HBA cards during RHEL3 U8 installation (for example, disk
formatting or RAID set up).
Workaround
Perform the required hard-disk drive configuration manually after the operating
system is installed on the local disks. If you use the KickStart automated installation,
it is possible to force the installer to load a specific driver with the
device
and
deviceprobe
command. Refer to the Red Hat KickStart documentation for
instructions.
RHEL3 U8 Installer Might Have Problems
Installing to a Hard-Disk Drive That Contains
Solaris Partitions (6415176)
The RHEL3 U8 installer is known to have problems when trying to install the
operating system to hard-disk drives that already contain Solaris partitions.
Workaround
It is recommended that you erase existing Solaris disk partition tables before
attempting to install RHEL3 U8.