Sun Microsystems Sun Fire T200, Руководство по установке

Страница: 67 / 80

Chapter 3 Powering On the System 47
Booting the Solaris Operating System
The Solaris OS is preinstalled on Sun Fire T2000 servers on the disk in slot 0. The
Solaris OS is not configured (that is, the
sys-unconfig
command was run in the
factory). If you boot the system from this disk, you will be prompted to configure the
Solaris OS for your environment.
▼
To Boot the Solaris Operating System
1. At the
ok
prompt, boot from the disk that contains the Solaris OS.
If you know which disk to boot from, skip Step a and perform Step 2 .
a. If you need to determine which disk to boot from, issue the
show-disks
command at the
ok
prompt to see the path to the configured disks.
2. Type the
boot
command at the
ok
prompt.
Use the value from Step 1 to construct the
boot
command. You will need to append
the target to the disk path. In the following example, the system is being booted
from disk 0 (zero), so
@0,0
is appended to the disk path.
ok show-disks
a) /pci@7c0/pci@0/pci@2/pci@0,2/LSILogic,sas@4/disk
q) NO SELECTION
Enter Selection, q to quit: q
ok
ok boot /pci@7c0/pci@0/pci@2/pci@0,2/LSILogic,sas@4/disk@0,0
Boot device: / pci@7c0/pci@0/pci@2/pci@0,2/LSILogic,sas@4/
disk@0,0
File and args:
Notice: Unimplemented procedure 'encode-unit' in
/pci@7c0/pci@0/pci@2/pci@0/LSILogic,sas@4
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.12 00/07/17 15:48:16.
Loading: /platform/SUNW,Ontario/ufsboot
Loading: /platform/sun4v/ufsboot
SunOS Release 5.10 Version
/net/spa/export/spa2/ws/pothier/grlks10-ontario:12/01/2004 64-bit
Copyright 1983-2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.