Sun Microsystems Sun Fire T200, Руководство по установке

Страница: 62 / 80

42 Sun Fire T2000 Server Installation Guide • April 2006
▼ To Reset the System Controller
After all of the configuration parameters are set, you must reset the system controller
for the new values to take affect.
●
Issue the
resetsc
command.
You are prompted to confirm that you want to reset the system controller. Reply
y
when prompted.
Note –
You can specify the
–y
flag to the
resetsc
command and bypass the
confirmation message.
The system controller resets, runs diagnostics, and returns to the login prompt.
ser_data 8
netsc_enetaddr
xx:xx:xx:xx:xx:xx
sys_enetaddr
xx:xx:xx:xx:xx:xx
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM POST 1.0
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test
TTYC - Internal Loopback Test, PASSED.
TTYD - Internal Loopback Test
TTYD - Internal Loopback Test, PASSED.
....................
TABLE 3-1
Sample Configuration Parameter Settings (Continued)
parameter value