Sun Microsystems Sun Fire T200, Руководство по установке

Страница: 59 / 80

Chapter 3 Powering On the System 39
The
sc
prompt is displayed at the first time the system controller is booted. The
default configuration provides an ALOM-CMT user account called
admin
. There is
no default password, so you must create a password using the system controller (
sc
)
password
command.
1. If this is the first time the system has been powered on, use the
password
command to set the
admin
password.
After the
admin
password has been set, on subsequent reboots, the
sc
login prompt
is displayed.
2. Enter
admin
for the login name followed by your password.
▼ To Configure the System Controller Network
Management Port
To access the system controller using the network for the first time, you must first
configure the SC network management port through the SC serial management port.
Set these network parameters according to the specific details of your network
configuration:
.........................
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
sc> password
password: Changing password for admin
Setting password for admin.
New password:
new_password
Re-enter new password:
new-password
sc>
TTYD - - PASSED
TTYC - - PASSED
MEMORY - - PASSED
MPC885 - - PASSED
Please login: admin
Please Enter password:
password
(Press
Return
twice)
sc>