Sun Microsystems StorEdge L1000 Скачать руководство пользователя страница 67

Страница: 67 / 128

Chapter 3

Basic Operations

▼

To Place the Library Off-line

1. With the library turned on and the control panel indicating “System On-line,”

press the Standby button on the control panel.

2. Verify that”System Off-line” appears in the control panel system state display.

▼

To Turn the Library Off

1. Using the Standby button, place the library off-line.

The library robotics completes the current command and then stops.

2. Verify that “System Off-line” appears in the control panel system state display.

3. Verify that the library gripper is empty by checking the Overview screen in the

control panel.

If there is a tape cartridge in the gripper, execute a Move command to place the
cartridge in an empty bin or drive. For more information, see “To Move a Cartridge”
on page 57.

4. At the front panel, set the power switch to the O (off) position.

Caution –

Always leave library power off for at least 15 seconds before turning the

power on again.

▼

To Insert Tape Cartridges

Caution –

Do not use

CompacTape I



CompacTape II



CompacTape IIIXT



tape

cartridges in this library.

Caution –

Examine all cartridges before loading them into the library or tape drive.

Look for label stock or other foreign material that may be clinging to the cartridges.

1. Prepare the tape cartridge to be inserted by labeling it and write-protecting or

write-enabling it as desired. For more information about these procedures, see
Chapter 2.

2. Press the Load Port button on the left side of the control panel. The library

unlocks the load port. The load port door springs open slightly when unlocked.

Содержание StorEdge L1000

































































































































Результаты поиска

Содержание StorEdge L1000

Отзывы:

Бренды по названию

Популярные бренды

Sun Microsystems StorEdge L1000, Руководство пользователя

Результаты поиска

Содержание StorEdge L1000

Отзывы:

Бренды по названию

Популярные бренды