Summit Radiant Edge HotSlot, Инструкция по установке и эксплуатации

Страница: 9 / 32

Summit Ice Melt Systems
PO Box 6928, Tahoe City, CA 96145
Ph: 530-583-8888 Fax: 530-583-7777
www.SummitIceMelt.com
Installation
Roof Preparation
The proper preparation of the roof is needed to ensure optimal energy
efficiency, performance, and to prevent leaks.
Radiant Edge HotSlot is suitable for slopes down to 2/12.
1. Existing Metal roofs): Trim back metal to flush to the eave
and remove fasteners on bottom 7" of roofing panel prior to
installing HotSlot.
2. Existing Composition Shingle: Carefully pry up second course of
shingles with a broad paint scraper or similar tool. Install HotSlot
along eave on first shingle course and tuck under second course of
shingles.
3. New Composition Shingle: Install starter and first course of
shingles. Install HotSlot along eave on first shingle course.
Continue installing shingles with standard exposure.
4. On other conditions such as existing shakes, slate, tile and
standing seam roofing, consider using the patented Radiant Edge
PRO™ or LT™ ice melt systems.
Page 8 of 29