Sumec PowerG PG720BS, Инструкция по эксплуатации

Страница: 13 / 20

chemicals and the abraded particles are hot from prolonged abrasion.
Therefore you must empty the device’s dust collection box before taking
a break or stopping work and always avoid overheating of the abraded
particles and the device.
Wear a dust mask!
Operation
Switching on and off
When operating the belt sander you can select between intermittent or
continuous operation mode.
For short sanding tasks use the intermittent operation mode. For longer
sanding tasks we recommend the continuous operation mode. Whilst
working in your selected mode the device functions as follows:
To switch on intermittent operation mode:
Press the ON / OFF switch.
To switch off intermittent operation mode:
Release the ON / OFF switch.
To switch on continuous operation mode:
Press the ON / OFF switch, and keep it pressed, then press the locking
knob.
To switch off continuous operation mode:
Press and then release the ON / OFF switch.
Sanding procedure
With the sander switched on, bring it into contact with the workpiece and
move it forward carefully. Work in parallel and overlapping widths.
Always work in the direction of the grain to avoid undesirable transverse
13