Sumec PowerG PG720BS, Инструкция по эксплуатации

Страница: 6 / 20

electric shock.
e) When working outdoors with an electrical power tool always
use extension cables that are also approved for use outdoors.
The use of an extension cable suitable for outdoor use reduces the
risk of electric shock.
f) Use a residual current device (RCD) for protection if operating
the electrical power tool in a moist environment is unavoidable.
The use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid unintentional operation of the device. Check that the
electrical power tool is switched off before you connect it to
the mains, pick it up or carry it. Accidents can happen if you carry
the device with your finger on the ON / OFF switch or with the
device switched on.
d) Remove any setting tools or spanners before you switch the
device on. A tool or spanner left attached to a rotating part of a
device can lead to injury.
e) Avoid placing your body in an unnatural position. Keep proper
footing and balance at all times. By doing this you will be in a
better position to control the device in unforeseen circumstances.
f) Wear suitable clothing. Do not wear loose clothing or jewellery.
6