background image

 

hazardous to health, the sander must be connected to a suitable 

external dust extraction device. 

c) 

  Ensure that there is adequate ventilation when working on plastic, 

paint, varnish etc. 

d)

   

The belt sander is designed for the dry sanding of large surfaces of 

wood, plastic, metal and plastic and painted surfaces. The device is 

to be used for dry sanding only. 

e)

   

Do not sand materials containing asbestos. Asbestos is a known 

carcinogen. 

 Warning!

 

POISONOUS DUSTS! 

Sanding paints containing lead, some types of wood and metal for 

example may give rise to hazardous or poisonous dusts and represents 

a risk to the health of the person operating the device and to anyone 

near the work area. 

Wear safety glasses and a dust protection mask! 

f)

   

Securely support the workpiece. Use clamps or a vice to grip the 

workpiece firmly. This is much safer than holding it with your hand. 

g) 

 

Never support yourself by placing your hands near or in front of the 

device or the workpiece surface. A slip can result in injury. 

h) 

 

If a dangerous situation arises, pull the mains plug immediately out 

of the mains socket. 

i)

     

Always work with the mains lead leading away from the rear of the 

device. 

j) 

   

Avoid contact with the moving sanding belt. 

k) 

 

Do not work on moistened materials or damp surfaces. 

l)

     

Always switch on the device before placing it against the workpiece. 

After sanding, lift the device from the workpiece before switching it 

off. 

9

Содержание PowerG PG720BS





















Отзывы: