Sumec PowerG PG720BS, Инструкция по эксплуатации

Страница: 10 / 20

m) When working always hold the device securely with both hands.
Always keep proper footing and balance.
n) Switch the device off and allow it to come to a complete standstill
before you put it down.
o) When taking a break from your work, before carrying out any tasks
on the device itself (e.g. changing the sanding belt) and when you
are not using the device, always pull the mains plug out of the
mains socket.
5) Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
APPLICATION
Intended Use
The belt sander is designed for dry sanding of large surfaces of wood,
plastic, metal, plaster and painted surfaces. The device may only be
used for dry sanding. Always use a sanding belt and grade of grit
suitable for the particular surface you are sanding. The speed selected
should also be appropriate for the material. The device is not intended
for commercial use. Any other use or modification to the device shall be
considered as improper use and could give rise to considerable dangers.
The manufacturer will not accept liability for loss or damage arising from
improper use.
Check the delivery parts
Carefully remove the machine from its packaging and check as the
10