Sumec PowerG PG720BS, Инструкция по эксплуатации

Страница: 14 / 20

sanding marks.
After sanding always lift the device from the workpiece before switching
it off.
Advice on use
Light sanding pressure is enough: Apply light sanding pressure only.
The weight of the belt sander alone is adequate to produce good
sanding results. By adopting this approach you will also prolong the life
of your sanding belts and obtain a smoother workpiece surface.
Sanding and surfaces:
The sanding output and the quality of the surface finish obtained are
determined by the belt speed and the grade of grit on the sanding belt.
Maintenance and cleaning
Warning ! Before you carry out any work on the belt sander
always pull the mains plug out of the mains socket.
The belt sander is designed to be maintenance-free.
a) Clean the device frequently. This should be done immediately after
you have finished using it.
b) Use a dry cloth to clean the device - never use petrol, solvents or
cleaners that attack plastic.
c) Always keep the ventilation slots clear.
d) Remove any adhering dust with a narrow paint brush.
Do not dispose of electrical appliances with your domestic waste!
1) The packaging comprises exclusively
environmentally-friendly material. Dispose of it in your
local recycling containers.
2) Take the battery to your nearest authorized service center
14