manualshive.com logo in svg

Sullivan-Palatek UD Series, Руководство пользователя

Поделиться
Скачать
Sullivan-Palatek UD Series Скачать руководство пользователя страница 68

60

PARTS CATALOG

8.1 

ORDERING PARTS

A list of recommended spare parts for this compressor is provided on the following page. These parts can 

be kept on hand to minimize downtime for the most common maintenance issues. A complete parts listing is 
included with exploded drawings for all the parts on the compressor.

Parts should be ordered from the nearest full-service distributor or factory-authorized compressor center. 
Call the factory only if parts cannot be obtained locally. before calling to order parts, please have the model 
and serial number information available. This information can be found on the serial number plate located on 
the compressor.

NOTE! 

Use the space provided on the inside cover of the manual to record the model and serial number of the 

compressor for future reference.

8.1.1 

CONTACT INFORMATION

For replacement parts and manuals contact:

Sullivan-Palatek, Inc. 

1201 West US Highway 20 

Michigan City, Indiana 46360

 

Phone: 

(219) 874-2497

 

Fax: 

(219) 872-5043

 

Toll Free:  (800) 438-6203

 

www.sullivan-palatek.com

8.2 

PARTS DRAWINGS

The parts drawings in this section are exploded drawings of the various assemblies and sub-assemblies 

which make up this machine. Standard models and more popular options available are covered.

NOTE! 

In referring to the rear, the front or to either side of the unit, always consider the starter face of the 

compressor as the front. Standing at the starter face of the compressor (front) will determine the right and 

left sides.

Содержание UD Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды