Suin TFG6800 Series Скачать руководство пользователя страница 81

Страница: 81 / 90

TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide

Suin Instruments Co., Ltd

amplitude and loading should be best within the limitation, two of which, especially, cannot get

the limitation at the same time in case that the power amplifier is damaged.

3.27.6 Warning

The amplifier is an independent module and can be removed from instrument.

After taking it from instrument, three jacks in rear panel will be seen. There is AC220V inside the

three jacks, so touch or insert conductive part or other dangerous action is strictly forbidden.

Otherwise the manufacture won’t afford any responsibility. For unnecessary reason, please don’t

take it from instrument.

3.28 IOT interface (option)

Internet of Things interface is an option. LoRa module with working frequency 398MHz-525MHz

will be built in if select this option. For details, please refer to ‘Internet of Things’ in CD.

Содержание TFG6800 Series



























































































Результаты поиска

Содержание TFG6800 Series

Отзывы:

Похожие инструкции для TFG6800 Series

Бренды по названию

Популярные бренды

Suin TFG6800 Series, Руководство пользователя

Результаты поиска

Содержание TFG6800 Series

Отзывы:

Похожие инструкции для TFG6800 Series

Бренды по названию

Популярные бренды