TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
57
Press
〖
X1
〗
soft key and set the starting point coordinates of the block to 150, and the crossing
point of the green cursor is the starting point of the waveform block.
Press
〖
X2
〗
soft key and set the end point coordinates of waveform block to 300, and the crossing
point of red cursor is the end point of waveform block. The waveform block is selected as the
second half of the tangent waveform.
Press
〖
PosSel
〗
soft key and set the coordinates of the inserted point to 500, and the crossing point
of the white cursor is the position to be inserted, behind the Sine as below picture shown.
Press
〖
Execute
〗
soft key and the selected waveform will be inserted to specified position.
Meantime, the original Sinc behind of inserted point will move to right with shape unchanging.
Block insert operation is to add the selected waveform block to the specified position as below
shown.
Block Copy: Press
〖
BMode
〗
soft key and select ‘BMode Copy’.
Still use the currently selected waveform block
