TFG6800 Series Function/Arbitrary Waveform Generator Users’ Guide
Suin Instruments Co., Ltd
53
In arbitrary waveform edition interface, Y-axis in left of waveform and Y-axis under waveform
will be adjusted automatically as changing of coordinates.
3.16.3 Cursor Selection
In arbitrary waveform edition interface, use cursor can fix position of a point in one waveform
quickly and precisely and display the X and Y coordinate values of this point.
Press
〖
Cursor XY
〗
soft key to select one cursor mode in four.
The cursor display will be closed if the ‘no cursor’ is chosen.
A piece of vertical cursor is displayed if ‘cursor X’ is chosen.
A piece of horizontal cursor is displayed if ‘cursor Y’ is chosen.
Two cursors are displayed horizontally and vertically if ‘cursor XY’ is chosen.
The cursor could be active when X or Y coordinate parameter is chosen.
3.16.4 Points Edition
The points edition allow user to operate the voltage setting for some point of one waveform, or
insert a point in specified position of a waveform, or delete a point. The function applies to a local
modification for exited waveform or to create a simple waveform with fewer points.
For example, make local modifications for a Sine with 100 points, insert and delete waveform
points.
Firstly insert a Sine with 100 points and amplitude 1Vpp.
Press
〖
Points Edit
〗
soft key to enter it’s interface.
Press
〖
Point
〗
soft key and set to 10, that is to edit the x-coordinate of the wave point.
Press
〖
Voltage
〗
soft key and set to 1V, that is to edit the Y-coordinate of the wave point.
